 |
|
Hannay Series 2 Power
Rewind Reel
This model comes in either power or manual rewind and
accommodated larger diameter hose for larger volume delivery.
Rewind
Choose gear-driven crank rewind or chain and sprocket
drive powered by electric motor, compressed air motor,
or hydraulic motor. Ring gear/bevel gear mechanism with
pinion shaft brake can be specified, at extra cost, as
an auxiliary crank rewind mechanism on power rewind reels.
Brakes and locks
Please specify the type of brake or locking device you
prefer. If not otherwise specified, reels will be supplied
with a pinion brake and power rewind reels with a friction
brake.
Inlet
Standard inlet is a 2" victaulic 90 degree ball bearing
swivel joint. Straight swivel joint may be specified at
no extra cost. A 2" female threaded straight or 90
degree inlet is also available on request, at no extra
cost.
Outlet Riser
2" ID flanged riser. Specify male or female fitting
and thread size and type when ordering.
Optional
roller
A factory-installed, stainless steel roller can be specified,
at extra cost, for bottom-wind reels. Rollers may also
be purchased as accessory items.
Chain clutch-reduction
units
Available at extra cost and recommended for use on reels
with 3.9" diameter or larger discs and/or when increased
torque and slower rewind speeds are required. Factory-installed
when specified or available as an accessory item for field
installation. Standard operating pressure is 600psi.
|
|
|
|
|
