Hannay Aviation Series 2 Hose Reels

This model comes in either power or manual rewind and accommodates larger diameter hose for higher volume delivery.

Rewind
Choose gear-driven crank rewind or chain and sprocket drive powered by electric, compressed air, or hydraulic motor. Ring gear/bevel gear mechanism with pinion shaft brake can be specified, at extra cost, as an auxiliary rewind mechanism on power rewind reels.

Brakes and locks
Please specify the type of brake or locking device you prefer. If not otherwise specified, crank rewind reels will be supplied with a pinion brake and power rewind reels with a friction brake.

Inlet
Standard inlet is a 2" victaulic 90 degree ball bearing swivel joint. Straight swivel joint may be specified at no extra cost. A 2" female threaded straight or 90 degree inlet is also available at no extra cost on request.

Outlet Riser
1-1/2" ID flanged riser. Specify male or female fitting and thread size and type when ordering. Standard swivel joint, hub assembly, and outlet riser are malleable iron and steel. Aluminum, stainless steel, bronze, and other nonferrous metals can be supplied for each of these components, at extra cost, when specified.

Optional roller
A factory-installed, stainless steel roller can be specified, at extra cost, for bottom-wind reels. Rollers may also be purchased as accessory items.

Chain reduction units
Available at extra cost and recommended for use on reels with 39" diameter or larger discs and/or when increased torque and slower rewind speeds are required. Factory-installed when specified or available as an accessory item for field installation.